334 – 4 Blade Heat Powered Stove Fan

The 334 4 blade heat powered stove fan is one of the most popular designs we offer. Not only is it small, but it is extremely powerful. At only 187mm high and 180mm wide, the 334 can fit into most stove surrounds. Also, because of its small design, it sits lower to the stove, has great circulation and therefore blows out very warm air. Should you need smaller in height, then out 524 or T84 coming in at just 125mm tall would be the perfect fit.

Why buy this 334 fan?

A stove fan is designed to equally distribute warm air across the room created by a gas or wood burning stove. It has a peltier module that acts as a generator to power the stove fan's discreet motor. Our stove fans only use heat from the stove so is completely self-powered. By using a stove fan this will result in lower fuel costs and reduced emissions. The stove fan will begin to operate when the surface temperature reaches 50°C. Because of the low starting temperature, our stove fan can be used on gas stoves as well as wood burning stoves. Using a stove fan is the most economical way to effectively circulate warm air. It uses no batteries so can be used where there is no electricity.

There is a safety strip on the base of the fan which is designed to gently lift the base of the fan to prevent it from overheating and damaging the motor. The safety strip will then lower the fan back when the stove decreases to the maximum operating temperature.

Note: Must be placed on top of the stove away from the flue pipe at a min. of approx. 4".

Like this fan? Why not check out our original 2 blade stove fan The 112.

1350 RPM Max (Average 1167 RPM)
Height 187mm, Width 180mm
Optimum burn (300°C) ft/min (CFM) 330 (90)
Increase the efficiency of your stove by up to 33%
Circulates warm air over large areas
Fully heat powered
50°C low starting temperature
Fan speed automatically varies with temperature
Very quiet operation
Constructed with anodised aluminium